|
| |
TM 9-2350-287-20-2
15-63. COMMANDER’S SEAT REPAIR (continued).
b.
1.
2.
3.
4.
5.
6.
DISASSEMBLY
WARNING
Spring is under tension. To prevent injury to personnel, use care during removal.
Place seat assembly (21) on suitable work surface with spring (24) parallel to surface. Press locking handle
(17) and release spring tendon.
Remove spring (24) from post bracket (23) and manual control lever (30).
Remove four shoulder screws (25), washers (19), nuts (18), and bearings (20) from manual control lever (30).
WARNING
Seat and manual control lever weigh 70 pounds.
support seat and manual control lever.
To prevent injury, have assistant
Press locking handle (17) and remove manual control lever (30) and seat (16) from post (22).
Remove screw (29) and quick-release pin (28) from manual control lever (30).
Remove two washers (26) and shaft (27) from manual control lever (30). Separate manual control lever (30)
and seat (16). Discard washers.
15-158
|
