|
| |
TM 9-2350-287-20-2
15-38. APU COMPARTMENT SIDE DOOR AND HINGE ASSEMBLY REPAIR.
This Task Covers:
a. Removal
b. Disassembly
c. Cleaning and Inspection
d. Assembly
e. Installation
Initial Setup:
Tools/Test Equipment:
• Cotter pin (Item 17, Appendix H)
• Endless sling (Item 20, Appendix 1)
• Lockwasher (16) (Item 164, Appendix H)
• Five-ton hoist (Item 23, Appendix 1)
• Lockwasher (16) (Item 166, Appendix H)
• General mechanic’s tool kit (Item 24,
• Lockwasher (2) (Item 196, Appendix H)
Appendix 1)
Equipment Conditions:
Materials/Parts:
•Vehicle parked on level ground (refer to
• Drycleaning solvent (Item 28, Appendix D)
TM 9-2350-287-1 O).
• Rag (Item 56, Appendix D)
a.
REMOVAL
1.
Attach sling to lifting lug (6) on APU compartment
side door (1) and to hoist, and take up slack.
WARNING
2.
3.
4.
Keep sling taut while removing screws from
hinges, or door may drop suddeniy, causing
injury to personnel.
Remove six screws (4) and Iockwashers (3) from
two hinge assemblies (5) and vehicle. Discard
Iockwashers.
Turn APU door handle (7) to open door (l).
WARNiNG
Personnel must stand clear during lifting
operations. A swinging or shifting load can
cause severe injury.
NOTE
For proper installation, note number and position
of shims.
Remove door (1) and shims (2), if any, from vehicle
and place on hard, level surface. Remove sling
from lifting lug (6) and hoist.
15-93
|
