|
| |
TM 9-2350-287-20-2
15-27. PERSONNEL SIDE DOOR REPLACEMENT.
This Task Covers:
a. Removal
b. Disassembly
c. Cleaning and Inspection
d. Assembly
e. Installation
Initial Setup:
Tools/Test Equipment:
Personnel Required: Three
• General mechanic’s tool kit (Item 24,
Appendix I)
Equipment Conditions:
• Vehicle parked on level ground (refer to
Materials/Parts:
TM 9-2350-287-10).
• Drycleaning solvent (Item 28, Appendix D)
• Personnel side door opened and secured
• Lockwasher (6) (Item 143, Appendix H)
(refer to TM 9-2350-287-10).
• Lockwasher (10) (Item 164, Appendix H)
• Lockwasher (2) (Item 166, Appendix H)
a.
REMOVAL
WARNING
Personnel side door is very heavy. At least two persons should support door while
screws are removed. Failure to follow this warning may result in severe injury to
personnel.
NOTE
For proper installation, record number and thickness of shims.
While two assistants support personnel side door (9), remove six screws (6), nuts (l), Iockwashers (2), and
washers (3), personnel side door (9), and shims (4) from hull. Discard Iockwashers.
b.
DISASSEMBLY
NOTE
For proper installation, record number and thickness of shims.
1.
Remove four screws (17), Iockwashers (1 6), and washers (1 5), bracket (14), and shims (13) from personnel
side door (9). Discard Iockwashers.
2.
Remove two screws (10) and Iockwashers (11) and striker (12) from personnel side door (9). Discard
Iockwashers.
3.
Remove six screws (8) and Iockwashers (7) and two hinges (5) from personnel side door (9). Discard
Iockwashers.
15-62
|
