|
| |
TM 9-2350-287-20-2
15-17. TOP LEFT DOOR REPLACEMENT.
This Task Covets:
a. Removal
b. Installation
Initial Setup:
Tools/Test Equipment:
• Endless sling (item 20, Appendix I)
• Five-ton hoist (Item 23, Appendix I)
• General mechanic’s tool kit (Item 24,
Appendix I
Materials/Parts:
• LockWasher (10) (Item 164, Appendix H)
• LockWasher (11) (Item 196, Appendix H)
• Seal (Item 282, Appendix H)
• Seal (2) (Item 283, Appendix H)
• Self-locking nut (item 323, Appendix H)
• Spring pin (2) (item 352, Appendix H)
Personnel Required: Two
Equipment Conditions:
• Vehicle parked on level ground
(refer to TM 9-2350-287-10).
• Top middle door opened and secured
(refer to TM 9-2350-287-10).
a.
1.
2.
3.
4.
5.
6.
REMOVAL
Attach sling to lifting lug (6) and hoist.
Remove screw (18), two washers (15), and self-locking nut (14) from hold-open bar (16). Allow hold-open bar
(16) to hang free from support (17). Discard self-locking nut.
NOTE
For proper installation, record number and thickness of shims.
Remove eight screws (10) and lockwashers (11), two hinges (12), and shims (13) from vehicle. Discard
lockwashers.
WARNING
Personnel must stand clear during lifting operations. A swinging or shifting load may
cause severe injury.
Using hoist, lift top left door (5) from vehicle and place on hard level surface.
Remove six screws (4) and Iockwashers (3) and two seal retainers (2 and 9) and seals (1) from top left door
(5). Discard Iockwashers and seals.
Remove five screws (4) and Iockwashers (3) and seal retainer (8) and seal (7) from top left door (5). Discard
Iockwashers and seal.
15-34
|
