|
| |
TM 9-2350-287-20-2
15-5. AIR INTAKE GRILLE ADJUSTABLE SUPPORT ASSEMBLY REPLACEMENT
(continued).
b.
1.
2.
3.
4.
c.
1.
2.
3.
d.
1.
2.
3.
DISASSEMBLY
Unscrew jamnut (4) and adjustment bar (5) until they disengage from
two adjustable screws (1 3). Remove jamnut (4) and adjustment bar (5)
from two adjustable screws (13).
Drive out four spring pins (10) from two plates (11), shims (12), and
plates (14). Discard spring pins.
Remove two plates (11) and shims (12) from two plates (14).
Remove two pins (15) and adjustable screws (13) from two plates (14).
ASSEMBLY
Install two adjustable screws (13) on two plates (14) with two pins (15).
Install two shims (12) and plates (11) on two plates (14) with four spring
pins (10).
Install two adjustab!e screws (13) on jamnut (4) and adjustment bar (5).
INSTALLATION
Secure adjustable support (3) in vehicle with two screws (1) and new Iockwashers (2).
Turn jamnut (4) and adjustment bar (5) until adjustable support (3) is firmly seated against grille. Tighten
jamnut (4) against adjustment bar (5).
Secure adjustable support (3) to grille with two nuts (6), four washers (8), two new Iockwashers (9), and two
screws (7).
FOLLOW-ON MAINTENANCE:
• Close right transmission access
door (refer to TM 9-2350-287-10).
15-13
|
