|
| |
TM 9-2350-287-20-2
15-4. AIR INTAKE GRILLE SUPPORT BRACKET REPLACEMENT (continued).
b .
INSTALLATION
NOTE
• If replacing support bracket, shimming may be necessary.
• If all five shims are required, use screw part number MS90727-1 12. If three shims are
required, use screw part number MS90727-111. If one or two shims are required, use
screw part number MS90727-110.
1.
Install shims (3), if removed, and support bracket (2) on vehicle hull with two screws (1). Do not tighten screws.
2.
Close air intake grille (refer to TM 9-2350-287-10) and lineup handle on grille with support bracket (2) by
moving support bracket (2) forward or rearward.
NOTE
If handle and air intake support bracket do not line up, shimming will be necessary.
3.
Open air intake grille (refer to TM 9-2350-287-10) and remove two screws (1) and support bracket (2).
4.
Install required number of shims (3) and support bracket (2) on vehicle hull with two screws (1). Do not tighten
screws.
5.
Close air intake grille (refer to TM 9-2350-287-10) and line up support bracket (2) with handle on grille by
moving support bracket (2) forward or rearward.
6.
Tighten two screws (1).
FOLLOW-ON MAINTENANCE:
• Close air intake grille (refer to TM 9-2350-287-10).
15-11
|
