TM 9-2350-287-20-1
7-77.
CREW AFES ELECTRICAL WIRING HARNESSES REPLACEMENT (continued).
e.
1.
2.
3.
4.
5.
f.
1.
2.
3.
4.
HARNESS 12352316 REMOVAL
Disconnect harness plug W2P3 (36) from connector (37).
Disconnect harness plug W2PI (40) from SCEA unit (11).
Disconnect harness plug S2P2 (38) from crew test and alarm (T/A) panel (39).
Remove 25 screws (42), washers (44), and Iockwashers (43), straps (41) and harness from ceiling and wall
of crew compartment.
Separate and remove harness 12352316 (45) from other harnesses. Discard
Iockwashers.
Remove harness 12352316 (45) from vehicle.
HARNESS 12352316 INSTALLATION
Install harness 12352316 (45) in vehicle using 25 straps (41), screws (42), washers (44), and new Iockwashers
(43).
In driver’s compartment, connect harness plug W2P3 (38) to connector (37).
In crew compartment, connect harness plug W2P2 (38) to crew T/A panel (39).
Connect harness plug W2PI (40) to SCEA unit (11).
7-244
