TM 9-2350-287-20-1
4-5. APU CARGO COMPARTMENT FUEL HOSES, PUMPS, AND FITTINGS REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tool/Test Equipment:
• Drain pan (Item 14, Appendix I)
• General mechanic’s tool kit (Item 24,
Appendix I)
Materials/Parts:
• Cap and plug set (Item 13, Appendix D)
• Teflon pipe sealant (Item 63, Appendix D)
• Lockwasher (6) (Item 175, Appendix H)
Personnel Required: Two
Equipment Conditions:
• Vehicle parked on level ground (refer to
TM 9-2350-287-10).
• Powerpack removed (lower engine
compartment fuel line only) (para 3-2).
• Left projectile rack assembly moved to rear of vehicle
(refer to TM 9-2350-287-10).
• Heating and ventilating duct removed (para 16-2).
• APU plenum removed (para 18-17).
• Engine compartment access cover removed
(para 15-16).
a.
REMOVAL
WARNING
Diesel fuel is flammable. Do not perform this procedure near fire, flame, or sparks.
injury or death to psrsonnel can result.
CAUTION
To prevent contamination to fuel system, all hoses and fittings must be capped
immediately after disconnection.
•
•
NOTE
Drain fuel from disconnected fuel lines into drain pan.
Perform steps 1 through 4 for lower engine compartment fuel line and fittings only.
4-5
