TM 9-2350-287-20-1
4-3.
RIGHT ELECTRIC FUEL PUMP AND CHECK VALVE REPAIR (continued).
e.
INSTALLATION
1.
Apply Teflon pipe sealant to new gasket (3).
NOTE
When installed on fuel tank 10955510, if the fuel pump touches the bottom surface
of fuel tank and the top plate does not seal on flange, loosen the screws on both
sides and make the fuel pump and hanger assembly shorter by the amount of gap
(measured without gasket) between flange and top plate plus 1/8 inch maximum.
Retighten both screws and install pump and hanger assembly (and gasket).
2.
Install gasket (3) and fuel pump assembly (4) on fuel tank (7) with 10 screws (5).
3.
Install check valve (1) on fuel pump assembly (4) and connect fuel hose (2).
4.
Connect electrical connector (6) to fuel pump assembly (4).
FOLLOW-ON MAINTENANCE:
Install powerpack (para 3-2).
Refill fuel tanks (refer to TM 9-2350-287-10).
Change 1 4-3.5
