TM 9-2350-287-20-1
2-22. SIMPLIFIED TEST EQUIPMENT FOR INTERNAL COMBUSTION
ENGINES (STE/lCE) (continued).
a. STE/ICE PMCS - (continued).
(12) GOVERNOR CHECK/POWER TEST - TK.
CAUTION
To avoid possible damage to the engine, check
governor operation before doing Power Test.
NOTE
Before doing Power Test, engine must beat
normal operating temperature.
A. 1. While watching VTM, increase engine speed
to maximum governor speed of 2350 to 2500
RPM.
2. Press accelerator to full throttle.
Does engine RPM stay between 2350 and 2500 RPM?
If RPM is higher, notify Direct Support
Maintenance. If RPM is lower, remove air
cleaner filters (para 4-14) and repeat step
A. If RPM is still lower than 2350, go to
para 2-22.b(13).
CAUTION
To prevent engine damage, do not perform
Power Test if engine temperature is above
the normal operating temperature.
NOTE
Engine speed must be below 1000 RPM.
Continued to next page
2-403
