9. CONVEYOR DRIVE AND IDLER SPROCKET BEARINGS.

TM-9-2350-287-10 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
381

TM 9-2350-287-10 - KEY - Expected Temperatures Lubricants Capacities Intervals Above ^15°F +40°Fto-10°F +40°Fto-65°F (Above -9°C) (+4°C to -260C) (+40C to -54°C) GAA Intervals are as fol- (MIL-G-10924) lows: GREASE, Automotive S-Semiannually and Artillery Intervals are based on normal hours of Conveyor Drive and operation and mod- Idler Sprocket Bearings erate operations All Temperatures conditions. Canister Compartment Restraint Bars Driver's Seat NOTES: 9. CONVEYOR DRIVE AND IDLER SPROCKET BEARINGS. Use a grease gun to inject GAA into the two idler sprocket grease fittings (13) and into the two drive sprocket grease fittings (14) until grease begins to seep from bearing block (15). 10. DRIVER'S SEAT MOVING PARTS. Brush GAA on vertical shaft (16) and horizontal shaft (18). Also, brush GAA on pivot points of seat adjusting lever (17) and backrest post (19). 11. CANISTER COMPARTMENT RESTRAINT BARS. Unhook restraint bar straps from eyes (21). Remove restraint bars (20) and apply a light coat of GAA to sliding portions of bars (22). Install restraint bars (20). Hook restraint bar straps to eyes (21). E-13

Privacy Statement
Press Release
Contact