TM 9-2350-287-10
MOUNTED WATER RATION HEATER (MWRH) MAINTENANCE
Installing the MWRH
CAUTION
Before installing the MWRH, make sure vehicle MASTER switch
is in OFF position.
1.
Place the MWRH in mounting bracket with controls facing user.
2.
Secure the MWRH to mounting bracket using three washers and wingnuts.
3.
Connect mounting strap and adjust until snug against the MWRH.
NOTE
Route power cable over MWRH mounting bracket before
connecting to the MWRH.
4.
Make sure MWRH control switch is in OFF position. Connect 90° connector to the
MWRH.
Removing the MWRH
CAUTION
Before removing the MWRH, make sure vehicle MASTER
switch is in OFF position.
1.
Make sure MWRH control switch is in OFF position. Disconnect 90° connector from the
MWRH.
2.
Disconnect mounting strap from the MWRH.
3.
Remove three wingnuts and washers from the MWRH.
4.
Remove the MWRH from mounting bracket.
Change 1
3-50.1/(3-50.2 blank)
