TM 9-2350-277-34
REPAIR ROADSIDE AC POWER EXTENSION BOX A18 (M1068A3 ONLY) — Continued
0103 00
ASSEMBLY
NOTE
The four screws that secure connector J1 are shorter. Do not mix with other connectors.
1.
Install four connectors (13) on cover (2) with dust caps (14) and secure with 16 screws (11) and new locknuts (12).
2.
Install connector J1 (10) on extension box (4) and secure with four screws (8) and new locknuts (9).
3.
Install connector J6 (7) on extension box (4) and secure with four screws (5) and new locknuts (6).
NOTE
See wiring diagram page 0103 00–2 for assembly/disassembly of wires to connectors.
4.
Connect leads to connectors if necessary.
5.
Install gasket (3) on extension box (4) with cover (2) and secure with four screws (1).
FOLLOW-THROUGH STEPS
1.
Install roadside AC power extension box A18 (see your -20).
END OF TASK
0103 00-3/4 blank
