TM 9-2350-277-34
REPAIR ENGINE AND TRANSMISSION STAND — Continued
0070 00
11. Position transmission support (1) on beam assembly (2). Install short spacer (3), beam assembly, long spacer (4), screw
(5), and new locknut (6) on transmission support.
REPLACE DATA PLATE
1.
Remove four drive screws (7).
2.
Locate new data plate (8) in same area. Using plate as a template, drill four mounting holes 3/64 - 1/16 inch diameter.
3.
Install four new drive screws (7).
0070 00-14
