TM 9-2350-277-34
ADJUST ENGINE AND TRANSMISSION STAND — Continued
0068 00
8.
Tighten two jam nuts (3) to secure beam assembly (4). Tighten two screws (6) securing the transmission support (7)
evenly.
9.
If the transmission (8) shifts up or down when separated from the engine, it will be necessary to adjust the transmission
support (7) to allow the transmission spline coupling to mate with the engine splined coupling. Repeat Steps 6 - 8.
10. Adjust transmission to keep the transmission level with the engine during disassembly and assembly.
END OF TASK
0068 00-7/8 blank
