REPLACE SERRATED LOCK RING SCREW INSERT AND PACKING

Table 1. SERRATED LOCK RING SCREW INSERT DATA

TM-9-2350-277-34 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
271

TM 9-2350-277-34 REPLACE SERRATED LOCK RING SCREW INSERT AND PACKING 0041 00 THIS WORK PACKAGE COVERS: Removal (page 0041 00-1). Installation (page 0041 00-2). INITIAL SETUP: Maintenance Level Direct Support Tools and Special Tools General Mechanic’s Tool Kit (WP 0120 00, Item 62) Portable Electric Drill (WP 0120 00, Item 8) Drill Set (WP 0120 00, Item 10) Screw Extractor Set (WP 0120 00, Item 14) Bearing Inserter (WP 0120 00, Item 28) Materials/Parts Sealing compound (WP 0122 00, Item 25) Preformed packing Screw insert Personnel Required Track Vehicle Repairer 63H10 References See your -10 Equipment Condition Engine stopped (see your -10) Access cover removed (see your -10) Carrier blocked (see your -10) REMOVAL 1. Drill out inside serrations of lock ring (1). Use 11/16 inch drill. 2. Drill to depth of counterbore (2). Maximum drill depth is 5/32. 0041 00-1

Privacy Statement
Press Release
Contact