TM 9-2350-277-34
REPLACE FRONT MAIN WIRING HARNESS — Continued
0030 00
34. Loosen two rear screws (14) from voltage regulator mounting plate (13). Slide voltage regulator (15) from mounts for
access.
35. Remove from inside of power plant compartment three screws (1), lockwashers (2), and clamps (3) that secure wiring
harness (4) on driver’s bulkhead. Remove wiring harness from bulkhead. Discard lockwashers.
36. Remove four screws (5), locknuts (6), and cover (7) that secure the wiring harness (4) on driver’s compartment bulkhead.
Pull harness through bulkhead into driver’s compartment. Discard locknuts.
0030 00-12
