TM 9-2350-277-20-6
REPLACE EXTERNAL CABLE TUBE — Continued
0905 00
9.
Cut tube (5) above sleeve (8). Remove two nuts (6)(9) and remove tube with sleeve (10). Discard tube and sleeves.
INSTALLATION
1.
Install new sleeve (8), two nuts (6) and (9), and adapter (7) on new tube (5).
NOTE
Make sure nuts, sleeves, and adapter are installed in the proper order and facing the right
direction as in illustration.
2.
Install adapter (7) in hull plate. Secure tube (5) to adapter with sleeve (8) and nut (6).
3.
Install adapter (3) in support bracket (4). Secure with nut (1) and jam nut (2).
4.
Install tube (5) on adapter (3). Secure with flared sleeve (10) and nut (9).
5.
Slide tube (5) through hole in hull plate.
6.
Install new adapter (2) on control valve (3).
7.
Install control valve (3) on fire extinguisher cylinder (4). Secure with captive nut (5).
8.
Install new nut (6) and new sleeve (7) on tube (1).
0905 00-3
