TM 9-2350-277-20-6
REPLACE INTERCOMMUNICATIONS SET CONTROL (M901A3 AND M58
ONLY)
0885 00
THIS WORK PACKAGE COVERS:
Removal (page 0885 00-1).
Installation (page 0885 00-2).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
Radio Equipment Tool Kit (WP 0926 00, Item 66)
Materials/Parts
Lockwasher (2)
Personnel Required
Signal Support System Specialist 31U10
References
See your -10
TM 11-5820-498-12
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Battery ground strap disconnected (WP 0337 00)
REMOVAL
NOTE
Set control location varies by vehicle. Refer to TM 11-5820-498-12 for C-2298/VRC
maintenance.
1.
Disconnect headset from connector (1) and intercom cable from connector (2).
NOTE
Step 2 applies only to M901A3.
2.
Remove two nuts (3), lockwashers (4), bolts (5), washers (6), and intercom station (7) from bracket (8). Discard
lockwashers.
0885 00-1