TM 9-2350-277-20-6
REPLACE DC BATTERY CABLE (W4) (M1068A3 ONLY) — Continued
0838 00
INSTALLATION
1.
Install cable W4 in carrier.
2.
Install circuit ground lead 32 (1) to post G3 (2) on carrier hull. Secure with new lockwasher (3) and screw (4).
3.
Connect cable W4 P1 (5) to power control box jack J25 (6).
4.
Route cable through six clamps (7). Secure with six screws (8).
5.
Secure cable with eight new plastic tie straps (9).
6.
Connect cable W4 E2 to positive battery terminal (10) with screw (11) and nut (12).
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0338 00).
2.
Turn MASTER SWITCH ON (see your -10). Check that electrical system works properly.
3.
Stop engine (see your -10).
END OF TASK
0838 00-3/4 blank
