TM 9-2350-277-20-5
REPLACE M13 NBC HEATER WIRING HARNESS (M1068A3 ONLY) Continued
0809 00
INSTALLATION
1.
Install circuit lead 537E (8) on rear operators heater (13).
2.
Install two clamps (12) on circuit lead 537D (8) and rear operators heater inlet hose (9). Secure clamps to right sponson
with two screws (10) and new lockwashers (11).
3.
Secure circuit lead 537E (8) to rear operators heater inlet hose (9) with new tie straps (7).
4.
Install circuit lead 537D (2) on front operators heater (6).
5.
Install clamp (5) on circuit lead 537D (2) and adjacent hoses. Secure with screw (3), new lockwasher (4), and clamp (5)
on right sponson.
6.
Secure circuit lead 537D (2) to adjacent hoses with new tie straps (1).
0809 00-6