TM 9-2350-277-20-5
REPLACE PERSONNEL HEATER FUEL PUMP (M113A3, M1059A3, AND M58 ONLY) —
Continued
0695 00
7.
Align clamp (12) on fuel pump lead (13) with hull weldnut. Secure with washer (14), two new lockwashers (15), and
screw (16).
8.
Connect fuel pump lead (13) to circuit 402 lead (17).
FOLLOW-THROUGH STEPS
1.
Connect battery ground strap (WP 0337 00).
2.
Open heater fuel shutoff valve (see your -10).
3.
Bleed fuel line (WP 0679 00).
4.
Start heater (see your -10). Check for fuel leaks. Turn heater off.
5.
Install rear floor plate (WP 0539 00), (WP 0542 00), or (WP 0545 00).
6.
Start engine (see your -10).
7.
Raise and lock ramp (see your -10).
8.
Stop engine (see your -10).
END OF TASK
0695 00-4
