TM 9-2350-277-20-4
REPLACE/REPAIR MAP BOARD (M1068A3 ONLY) — Continued
0618 00
INSTALLATION
1.
Install two brackets (1), new locknuts (2), washers (3), and six screws (4) on map board (5).
2.
Install frame (6) and 12 screws (7) on map board (5).
3.
Install 14 screws (7) in sides of frame (6).
4.
Install hinge (8), new locknuts (9), eight washers (10), and four screws (11) on frame (6).
5.
Install two stakes (12) in brackets (1).
6.
Install two tips (13) on stakes (12).
7.
Install strap (17) to secure map board.
8.
Align map board assembly (14) with right side bulkhead mounts. Secure with two screws (15) and washers (16).
FOLLOW-THROUGH STEPS
1.
Start engine (see your -10).
2.
Raise and lock ramp (see your -10).
3.
Stop engine (see your -10).
END OF TASK
0618 00-3/4 blank
