TM 9-2350-277-20-4
REPLACE COMMANDER’S SEAT (OBSERVATION PERISCOPE) (M901A3 AND M981A3
ONLY) — Continued
0565 00
3.
Remove two locknuts (7), washers (8), screws (9), and washers (10) from support (3). Remove support from carrier.
Discard locknuts.
INSTALLATION
1.
Install support (3) in carrier and secure with two screws (9), washers (10), washers (8), and new locknuts (7).
2.
Install quick-release pin and cable assembly (6) on seat (2) and secure with washer (5) and screw (4).
3.
Install seat (2) on support (3). Secure with pin (1).
END OF TASK
0565 00-2
