REPLACE/REPAIR COMMANDERS PLATFORM AND POST (M577A3 AND M1068A3 ONLY)

FOLLOW-THROUGH STEPS - TM-9-2350-277-20-4_641

TM-9-2350-277-20-4 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 (EIC AE7) Carrier Command Post Light Tracked M577A3 2350-01-369-6085 (EIC AE7) Manual
Page Navigation
535

TM 9-2350-277-20-4 REPLACE/REPAIR COMMANDER’S PLATFORM AND POST (M577A3 AND M1068A3 ONLY) 0564 00 THIS WORK PACKAGE COVERS: Removal (page 0564 00-1). Disassembly (page 0564 00-2). Inspection (page 0564 00-3). Assembly (page 0564 00-3). Installation (page 0564 00-4). INITIAL SETUP: Maintenance Level Unit Tools and Special Tools General Mechanic’s Tool Kit (WP 0926 00, Item 65) Materials/Parts Cotter pin (2) Locknut (3) Locknut (2) Locknut (10) Spring pin Personnel Required Unit Mechanic References See your -10 Equipment Condition Engine stopped (see your -10) Carrier blocked (see your -10) Ramp lowered (see your -10) REMOVAL 1. Remove two screws (1) and washers (2) from base (3). 2. Open both ends of hook (4). Remove from hull top plate lug and chain (5). 3. Remove tube (6) from chain (5). 4. Open both ends of hook (7). Remove hook (7) from chain (5) and quick-release pin (8). 5. Remove locknut (9), washer (10), screw (11), and link (12) from hull top plate brackets. Remove post (13) and platform (14) from carrier. Discard locknuts. 6. Remove pin (8) and link (12) from post (13). 7. Remove two locknuts (15), washers (16), screws (17), and base (3) from post (13). Discard locknuts. 0564 00-1

Privacy Statement
Press Release
Contact