TM 9-2350-277-20-4
REPAIR DRIVER’S SEAT — Continued
0552 00
NOTE
Connect brace to the two forward holes of the rails.
4.
Install rails (9) and brace (10) on seat (4). Secure with eight screws (11) and new locknuts (12).
5.
Align holes between rails (9) and support (13). Place spacers (14) between rails (9) and support (13), and secure with
two screws (15) and washers (16).
6.
Place right and left flanges (17) on support (13). Secure to seat (4) with six screws (18), new locknuts (19), and
washers (20).
7.
Place cushion (21) on seat (4) and connect hooks on cord (22).
FOLLOW-THROUGH STEPS
1.
Install driver’s seat assembly (WP 0551 00).
2.
Install driver’s seat back assembly (WP 0553 00).
END OF TASK
0552 00-3/4 blank
