TM 9-2350-277-20-4
REPLACE RAMP SEAL — Continued
0514 00
INSTALLATION
NOTE
Trim seal to fit.
1.
Place lower seal (4) on rear bulkhead. Bend three retaining strips (3) on seal to secure in place.
2.
Place upper seal (2) on rear bulkhead. Bend retaining strip (1) down on seal to secure in place.
FOLLOW-THROUGH STEPS
1.
Start engine (see your -10).
2.
Perform ramp seal chalk test (WP 0521 00).
3.
Raise and lock ramp (see your -10).
4.
Stop engine (see your -10).
END OF TASK
0514 00-2
