TM 9-2350-277-20-4
REPLACE SMOKE GRENADE LAUNCHER GUARD, PLATE, AND BASE (M113A3,
M901A3, M981A3, AND M1059A3 ONLY) — Continued
0455 00
INSTALLATION
1.
Install base (6) on hull front plate. Secure with three screws (4), and new lockwashers (5).
2.
Install plate (11) on base (6). Secure with three nuts (7), screws (8), new lockwashers (9) and washers (10).
NOTE
If there is an interference problem between tubes and guard, shim the two top guard holes using
washers.
3.
Install guard (3) on front hull plate. Secure with four screws (1) and new lockwashers (2).
END OF TASK
0455 00-3/4 blank
