TM 9-2350-277-20-3
REPLACE SERVICE BRAKE CONTROL LINKAGE — Continued
0410 00
10. Install brake arm (1) on right hand apply shaft (16). Secure with screw (17), washer (18), and new lockwasher (19).
TIGHTEN SCREW TO 25-27 LB-FT (34-37 N m) TORQUE.
11. Install brake arm (6) on left hand apply shaft (20). Secure with screw (21), washer (22), and new lockwasher (23).
TIGHTEN SCREW TO 25-27 LB-FT (34-37 N m) TORQUE.
12. Install linkage rod (1) on cross-shaft link (2) and link (3). Secure with two new cotter pins (4), four washers (5), and two
clevis pins (6).
0410 00-10
