TM 9-2350-277-20-3
REPLACE REAR MAIN WIRING HARNESS (M1068A3 ONLY) — Continued
0365 00
31. Disconnect circuit 21 lead (1), circuit 22 lead (2), circuit 23 lead (3), and circuit 24 lead (4) from trailer wiring
harness (5).
32. Disconnect circuit 451 lead (6) from rear bilge pump (7).
33. Remove screw (8), two lockwashers (9), clamp (10), and trailer wiring harness ground lead (11) from weldnut (12).
Remove clamp from rear main wiring harness (13). Discard lockwashers.
34. Pull circuit 21 lead (1), circuit 22 lead (2), circuit 23 lead (3), circuit 24 lead (4), and circuit 451 lead (6) through opening
in transverse beam.
35. Remove two screws (14) and clamps (15) from two weldnuts (16). Remove clamps from rear main wiring harness (13).
36. Remove eight screws (17), lockwashers (18), clamps (23), and rear main wiring harness (13) from eight weldnuts.
Discard lockwashers.
37. Disconnect circuit 38C lead (19) from left dome light (20).
38. Disconnect circuit 38B lead (21) from front blackout light (22).
0365 00-7
