TM 9-2350-277-20-3
REPLACE REAR MAIN WIRING HARNESS (M1064A3 ONLY) Continued
0364 00
37. Disconnect circuit 38 lead (16) from dome light (17).
NOTE
If needed, remove personnel heater for access.
38. Remove three screws (18), lockwashers (19), clamps (20), and circuit 38 lead (16) from three weldnuts (21). Discard
lockwashers.
39. Attach twine (22) to circuit 38 lead (16). Pull lead through transverse beam (23) into drivers compartment. Remove
twine from lead and leave it in transverse beam.
0364 00-9