TM 9-2350-277-20-3
REPLACE DOME LIGHT (ALL EXCEPT M577A3 AND M1068A3) — Continued
0309 00
INSTALLATION
1.
Place dome light (2) on two mount brackets (6). Slide four new lockwashers (4), one at a time, between dome light and
mount bracket (5) and secure with screws (3) and new locknuts (5).
2.
Connect circuit 38 lead (1) to rear of dome light (2).
FOLLOW-THROUGH STEPS
1.
Connect battery ground strap (WP 0337 00), (WP 0338 00), or (WP 0339 00).
2.
Turn MASTER SWITCH ON (see your -10).
3.
Turn dome light switch on and off to check that light works (see your -10).
4.
Turn MASTER SWITCH OFF (see your -10).
END OF TASK
0309 00-2
