TM 9-2350-277-20-2
REPLACE VENTILATING FAN ASSEMBLY — Continued
0247 00
INSTALLATION
NOTE
Fill on level ground.
1.
Fill fan drive right angle gearbox (6) (WP 0155 00).
2.
Install fan drive pulley (1) on fan assembly (2) (WP 0244 00).
3.
Attach sling and suitable lifting device of at least 150 lbs (68 kg) capacity to fan assembly (2). Lift fan assembly and
install on power plant grill (3).
4.
Install six screws (4) and washers (5). TIGHTEN SCREWS TO 24-28 LB-FT (33-38 N M) TORQUE.
FOLLOW-THROUGH STEPS
1.
Lower power plant grill (WP 0464 00).
END OF TASK
0247 00-3/4 blank
