FOLLOW-THROUGH STEPS - TM-9-2350-277-20-2

TEMPORARY FUEL TANK REPAIR (M577A3 AND M1068A3 ONLY)

REPLACE FUEL TANK FILLER COVER AND LOCK (ALL EXCEPT M577A3 AND M1068A3)

TM-9-2350-277-20-2 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 Carrier Command Post Light Tracked M577A3 2350-01-369-6085 Manual
Page Navigation
282

TM 9-2350-277-20-2 TEMPORARY FUEL TANK REPAIR (M577A3 AND M1068A3 ONLY) — Continued 0181 00 NOTE Sealing compound is usable for two hours after mixing. Use mixed sealing compound within this time. 5. Apply mixed sealing compound 3/16-1/4 inch (4-6 mm) thick over repair area. 6. Apply 1/16 inch (2 mm) minimum of sealing compound over reinforcement. Sealing compound must extend at least two inches (5 cm) beyond reinforcement on all sides. 7. Allow sealing compound to cure before filling fuel tank. Sealing compound will be tack-free in 40 hours and cured in 72 hours. FOLLOW-THROUGH STEPS 1. Install fuel tank (WP 0180 00(, (optional). 2. Fill fuel tank (see your -10). Check tank for leaks. 3. Connect battery ground lead (WP 0338 00). 4. Start engine (see your -10). 5. Raise and lock ramp (see your -10). 6. Stop engine (see your -10). END OF TASK 0181 00-2

Privacy Statement
Press Release
Contact