REPLACE FUEL TANKS (M577A3 AND M1068A3 ONLY)

FOLLOW-THROUGH STEPS - TM-9-2350-277-20-2_321

REPLACE FUEL TANKS (M577A3 AND M1068A3 ONLY) Continued

TM-9-2350-277-20-2 Carrier Personnel Full Tracked Armored M113A3 2350-01-219-7577 Carrier Command Post Light Tracked M577A3 2350-01-369-6085 Manual
Page Navigation
276

TM 9-2350-277-20-2 REPLACE FUEL TANKS (M577A3 AND M1068A3 ONLY) 0180 00 THIS WORK PACKAGE COVERS: Removal (page 0180 00-1). Installation (page 0180 00-4). INITIAL SETUP: Maintenance Level Unit Tools and Special Tools General Mechanic’s Tool Kit (WP 0926 00, Item 65) Materials/Parts Sealing compound (WP 0928 00, Item 56) Key washers (6) Locknut (4) Personnel Required Unit Mechanic References See your -10 Equipment Condition Engine stopped (see your -10) Carrier blocked (see your -10) Ramp lowered (see your -10) Battery ground lead disconnected (WP 0338 00) Map board removed (see your -10) Work tables removed (WP 0578 00) or (WP 0581 00) and (WP 0582 00) Fuel tanks drained (WP 0178 00) Rear bilge pump discharge tube removed (WP 0634 00) Fuel quantity transmitter removed (WP 0191 00) Fuel tank access cover removed (WP 0188 00) Fuel tank filler flange removed (WP 0189 00) REMOVAL 1. Disconnect four supply hoses (1) and four adapters (2) from fuel tanks (3) and (4). 2. Loosen two clamps (5) and remove two supply hoses (6) from fuel tanks (3) and (4). 3. Disconnect vent hose (7) from elbow (8). 4. Disconnect vent hose (9) from elbow (10). 0180 00-1

Privacy Statement
Press Release
Contact