TM 9-2350-277-20-2
REMOVE/INSTALL POWER PLANT ASSEMBLY — Continued
0156 00
14. Remove two locknuts (10), screws (3), washers (2), two straps (5), and tow start cable (4) from bracket (1). Remove
cotter pin (12), two washers (11), and pin (6) from control arm (13). Loosen set screw (9) and remove collar (8) and
cable from arm. Discard cotter pin and locknut.
15. Remove two screws (13), washers (14), locknuts (15), and link (16) from link (17) and pivot shaft arm (18). Discard
locknuts.
0156 00-7
