TM 9-2350-277-20-2 PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS), INCLUDING LUBRICATION INSTRUCTIONS — Continued 0155 00 ITEM NO. INTERVAL MAN- HOUR ITEM TO BE CHECKED OR SERVICED CREWMEMBER PROCEDURE EQUIPMENT NOT READY/ AVAILABLE IF: 22 Semi- Annual Shock Absorber a.  Check shock absorber for dents or cracks. Replace shock absorber that is bent, broken, cracked, or dented enough to hinder operation (WP 0435 00). Any cracked, broken, bent or missing shocks, dents that hinder shock operation or Class III fluid leaks. b.  Replace shock absorbers if they have Class III fluid leaks or loose fitting bearings (WP 0435 00). SHOCK ABSORBER BRACKET MOUNTING HARDWARE MOUNTING HARDWARE 23 Semi- Annual Shock Absorber Mounting Hardware a.  Check shock absorber mounting hardware for looseness. Tighten loose hardware to 130-140 lb-ft (176-190 N m) torque. Use torque wrench (WP 0926 00, Item 79). 24 Semi- Annual Shock Absorber Bracket Mounting Hardware a.  Check shock absorber mounting hardware for looseness. Tighten loose hardware to 130-140 lb-ft (176-190 N m) torque. Use torque wrench (WP 0926 00, Item 79). 0155 00-72