TM 9-2350-277-20-1
STE/ICE TEST 68 STARTER MOTOR VOLTAGE DIAGNOSTIC
TROUBLESHOOTING—Continued
0148 00
3Y
1. Turn MASTER SWITCH OFF.
2. Set up Test 91 TM 9-4910-571-12&P.
3. Measure resistance between harness 12354593 plug P1 (1), pin k
(2) and ground.
4. Does VTM read more than 0 ohms?
YES
NO
3YN
1. Replace wiring harness 12354593
(WP 0882 00).
2. Verify no faults found.
4Y
1. Set up Test 89 TM 9-4910-571-12&P.
2. Remove harness 12354672 plug P4 (1) from harness 12354593
jack J1 (2).
3. Turn MASTER SWITCH ON.
4. Measure voltage between harness 12354672 plug P4 (1), pin A
(3) and ground.
5. Depress START button for 2 to 4 seconds.
6. Does VTM read 0 volts?
YES
NO
4YN
1. Repair/replace wiring harness
12354593 circuit 799 (WP 0382 00)
or (WP 0882 00).
2. Verify no faults found.
0148 00-3
