TM 9-2350-277-20-1
TRANS OIL HI TEMP INDICATOR MALFUNCTIONS—Continued
0057 00
C2Y
1. Install TRANS OIL HI TEMP indicator cover lens, gasket, bulb,
and gasket.
2. Remove harness 12349873 plug (1) from harness 12349881 jack
(2) at carrier bulkhead.
3. Measure resistance between harness 12349873 plug (1) pin G (3)
and ground.
4. Does multimeter read more than 0 ohms?
YES
NO
C2YN
1. Remove jumper wire and install
harness 12349873 circuit 327 plug
on trans oil hi temp switch.
2. Faulty harness 12349881 circuit 327.
Beyound unit maintenance repair.
3. Notify supervisor.
C3Y
1. Install harness 12349881 circuit 327/27G plug on trans oil hi
temp indicator.
2. Repair harness 12349873 circuit 327 (WP 0382 00).
3. Verify no faults found.
0057 00-6
