TM 9-2350-267-24P
5.
SPECIAL INFORMATION.
Use the following subparagraphs as applicable:
a.
b.
c.
d.
e.
Usable On Code, The usable on code appears in the lower left corner of the Description column heading.
Usable on codes are shown as “UOC: . . . . . . . “ in the Description column (justified left) on the first line
applicable item description/nomenclature. Uncoded items are applicable to all models.
Bulk materials required to manufacture items are listed in the Bulk Material
Functional Group of this manual. P/N’s for bulk materials are also referenced in the description column
of the line item entry for the item to be manufactured/fabricated. Detailed fabrication instructions for items
source coded to be manufactured or fabricated are found in TM 9-2350-267-20 and TM 9-2350-267-34.
Detailed assembly instructions for items source coded to be assembled from
component spare/repair parts are found in TM 9-2350-267-20 and TM 9-2350-267-34. Items that make
up the assembly are listed immediately following the assembly item entry.
Index Numbers. Items which have the work BULK in the figure-number column will have an index number
shown in the item number column. This index number is furnished for use as a cross-reference between
the National Stock Number/Part Number index and the bulk material list in Section Il.
The publications listed below pertain to M992 and its components.
Publication
.
.
TM 3-4240-276-30&P
LO 9-2350-267-12
TM 9-2350-267-10
TM 9-2350-267-1 0-HR
TM 9-2350-267-20
TM 9-2350-267-34
TM 9-2520-234-34P
TM 9-2540-205-24P
TM 9-2815-202-24P
TM 9-2815-221-34&P
TM 9-2920-224-34&P
TM 9-2920-225-34&P
TM 9-2920-242-34P
TM 9-2920-248-35&P
Short Title
Air Purifier and Precleaned
Carrier, Ammunition, Tracked, M992
Carrier, Ammunition, Tracked, M992
Carrier, Ammunition, Tracked, M992
Carrier, Ammunition, Tracked, M992
Carrier, Ammunition, Tracked, M992
Power Train Assembly, (Allison Model XTG-411-2A)
Personnel Heater
Engine, Diesel, Series 8V71 T
Engine, Diesel, Industrial type Model DJEAM
300 AMP Generator
Generator
Starter
Starter
6.
HOW TO LOCATE REPAIR PARTS.
(1)
(2)
(3)
First. Using the table of contents, determine the functional group or subfunctional group to which the
item belongs. This is necessary since figures are prepared for functional groups and subfunctional
groups, and listings are divided into the same groups.
Second. Find the figure covering the functional group or subfunctional group to which the item
belongs.
Third. Identify the item on the figure and note the item number of the item.
Fabrication Instructions.
Assembly Instructions.
Associated Publications.
a. When National Stock Number or Part Number Is Not Known:
