CREW AUTOMATIC FIRE EXTINGUISHING SYSTEM
FIRE DETECTION TEST AND ALARM
BOTTLES NOT DISCHARGING WHEN PULLING MANUAL CABLES.
PANEL INDICATORS
(EFFECTIVE FOR ALL VEHICLES)
Before troubleshooting AFES, check the following:
1 Make sure MASTER switch is set to OFF (TM 9-2350-267-10).
2 Left projectile rack assembly moved to rear of vehicle (TM 9-2350-267-10).
3 Maim sure crew AFES T/A panel Maintenance switch is turned to maintenance
position (p 14-14.5).
NOTE
l Instead of using multimeter for voltage check, STE/ICE troubleshooting,
INDIVIDUAL BATTERY VOLTAGE ST-TEST 89 may be performed.
l Instead of using multimeter for continuity check STE/ICE troubleshooting,
TEST 91 maybe performed.
Ensure locking pins on crew fire extinguisher cylinder bottles 3 and 4 and
engine fire extinguisher cylinder bottle 2 are in stowed position. If pins are in
correct position, check adjustment of cables (p 14-55). Verify problem is
solved. If pins are not in correct position, install pins correctly. Verify problem
is solved.
2-306.23 Change 4
TM 9-2350-267-20
