INITIAL SETUP
STE/ICE TEST NO. 24 FUEL SUPPLY PRESSURE
References:
TM 9-2350-267-10
TM 9-4910-571-12&P
Equipment Condition
STE/ICE hooked up to DCA.
Vehicle blocked.
A
B
C
D
E
F
G
H
1
J
K
Dial test select (1) to 60.
Press and release test button (2). Display (3) will indicate VEH.
Dial test select (1) to 11.
Press and release test button (2). Display (3) will indicate 11.
Dial test select (1) to 24.
Press test button (2) until display (3) shows CAL. Release test
button (2).
Check display (3).
1 If display (3) shows between ± 15, press and release test
button (2).
2 If display (3) shows less than - 15 or more than + 15 refer
to TM 9-4910-571-12&P
Start engine. See TM 9-2350-267-10.
Check display (3).
Test No. 24 passes if display (3) shows between 40-70 psig.
Stop engine. See TM 9-2350-267-10.
Return to troubleshooting.
TA312651
2-48.15
Change 1
TM 9-2350-267-20
