TM 9-2350-261-34
INSTALL
4. Clamp or tack weld new hinge(s) parts
(1, 2, or 3) on hatch (4). Set cover on
commander’s cupola. Check alignment of cover
hinges with hinges on hull.
5. Make sure hinges are aligned and spaced as
shown.
6. Weld hinges to hatch in accordance with
TM 9-237. Use electrode type 5356.
7. Clean the weld area and apply touch-up
paint to all bare metal (see TM 43-0139).
FOLLOW-THROUGH STEPS
1. Install commander’s cupola cover on carrier
2. Reconnect battery ground (see your -20).
(see your -20).
END OF TASK
8-17
