TM 9-2350-261-20-4
REPLACE FOG OIL TANK MODULE (M1059 ONLY) -- Continued
0695 00
NOTE
Slide fog oil tank all the way to the left side of carrier to clear air compressor for installation
of tank in carrier.
3.
Slide fog oil tank module (3) onto hull cross members. Have helper assist. Secure to hull with six screws (1) and
washers (2).
4.
Remove two safety caps (6) from two fog oil hoses (7).
5.
Connect two fog oil hoses (7) to two quick disconnect couplings (5).
6.
Connect cable assembly (8) to fog oil pump electrical cable assembly (9).
7.
Install breather hose (10) on fog oil tank (3).
FOLLOW-THROUGH STEPS
Connect battery ground lead (WP 0294 00).
1.
Set circuit breaker CB1 to ON. See TM 3-1040-283-10.
2.
Service fog oil tank as required. See TM 3-1040-283-20&P.
3.
Raise and lock ramp (see your -10).
4.
Stop engine (see your -10).
5.
END OF TASK
0695 00-6
