TM 9-2350-261-20-1
1. Remove ten screws (1) and lockwashers (2), and lower
faceplate (3). Discard lockwashers.
2. Remove twelve screws (4), lockwashers (5), and cover
(6) from Power Control Enclosure (7). Discard
lockwashers.
3. Apply an external source of AC power
(TM 11-7010-256-12&P).
4. Set AC MAIN circuit breaker on Power Control
Enclosure panel to ON.
5. Is external source of AC power accepted by Power
Control Enclosure?
1. Go to: Vehicle Will Not
Accept External AC Power
(page 3-226.76).
3-226.110
Change 3