TM 9-2350-261-20-1
1. Turn MASTER POWER switch OFF.
2. Install cable W5 on power enclosure.
3. Remove ten screws (1) and lockwashers (2), and lower
faceplate (3). Discard lockwashers.
4. Measure resistance between circuit breaker CB3 pin 2
(4) and reversing contactor RC1-REV terminal L1 (5).
5. Does multimeter read 0 ohms?
Change 3
1. Faulty lead 13A.
2. Notify your Supervisor.
3-226.82
