TM 9-2350-261-20-1
1. Set MASTER SWITCH to OFF (see your-10).
2. Remove cable W28, plug P1 (1) from adapter plug
P1 (2).
3. Measure resistance between cable W28 plugs P1 and
P2 (3).
4. Does multimeter read 0 ohms?
YES
1. Remove lead 38B (1) from adapter plug P3 (2).
2. Set MASTER SWITCH to ON (see your -10).
3. Measure voltage between lead 38B (1) and ground.
4. Does multimeter read 22 volts DC or more?
1. Refer to: Dome Lights Mal-
function (M577A2)
(page 3-117).
GO TO NEXT PAGE
3-226.59
1. Replace cable W28
( p a g e 4 0 . 1 - 8 2 ) .
2. Verify no faults found.