S E R V I C E A N D / O R B L A C K O U T S T O P L I G H T S M A L F U N C T I ON CONT.

S E R V I C E A N D / O R B L A C K O U T S T O P L I G H T S M A L F U N C T I ON

S E R V I C E A N D / O R B L A C K O U T S T O P L I G H T S M A L F U N C T I ON CONT. - TM-9-2350-261-20-1_298

TM-9-2350-261-20-1 Carrier Personnel Full Tracked Armored M113A2 2350-01-068-4077 Carrier Command Post Light Tracked M577A2 2350-01-068-4089 Manual
Page Navigation
267

TM 9-2350-261-20-1 1. 2. 3. 4. 5. Turn MASTER SWITCH to OFF. Remove front main harness circuit 75A plug (1) from stop light switch jack (2). Remove front main harness circuit 75B plug (3) from stop light switch jack (4). Measure resistance between switch jacks (2) and (4) with switch depressed and with switch released. Does multimeter read infinity with switch depressed and O ohms with switch released? 1. 2. 3. 4. 5. Install front main harness circuit leads 75A and 75B on stop light switch. Remove instrument panel for access. See task: remove instrument panel mounts and ground lead (page 11-2). Remove front main harness plug (1) from lighting control switch jack (2). Measure resistance between front main harness plug (1) pins K (3) and A (4) with both steering levers locked in parking brake position. Does multimeter read 0 ohms? I 1. Replace main light switch (page 11-9). 2. Verify no faults found. 3-90 NO 1. Replace stop light switch (page 12-132). 2. Verify no faults found. NO 1. Faulty front main harness circuit 75A and/or 75B. I 2. Notify your supervisor.

Privacy Statement
Press Release
Contact