TM 9-2350-261-20-1
1.
2.
3*
4.
5.
Install circuits 14 and 74 plugs on neutral start
switch jacks.
Remove instrument panel for access (page 11-2).
Remove circuit 74A/74 plug (1) from start switch
(2).
Measure resistance between start switch (2) jack
pins with start switch depressed.
Does multimeter read 0 ohms?
1. Turn MASTER SWITCH to ON.
2. Measure voltage between circuit 74 pin (1) and
ground.
3. Does multimeter read more than 17 volts?
4. Turn MASTER SWITCH to OFF.
1. Repair front main wiring harness circuit 74A
(page 14-3).
2. Verify no faults found.
1. Replace start switch
(page 11-10).
2. Verify no faults found.
1. Repair front main wiring
harness circuit 74
(page 14-3).
2. Verify no faults found.
3-18
