TM 9-2350-247-34
INSTALL ENGINE COOLANT HEATER KIT (M548A1) — Continued
0061 00
53. Install vacuum breaker valve and filter breather assembly in elbow.
54. Connect right fuel inlet tube on tee.
55. Remove two screws (1), control box panel (2), and control box cover (3). Remove panel.
56. Remove and discard two existing control box mounting nuts, washers, and screws from control box.
57. Install control box cover (3) on hull in cab with two control box mounting screws (4), rear mounts (5), washers (6), and
nuts (7).
58. Install control box panel (2) in control box cover (3) with two screws (1).
0061 00-12
